2013 Ford Explorer Oil Change in Braintree, MA

At Herb Chambers Ford of Braintree, a 2013 Ford Explorer oil change typically costs $79–$129 before tax and shop fees.

This price reflects OEM-spec Motorcraft oil and a Ford filter, plus a complimentary multi-point inspection and proper oil/filter disposal. You can review current coupons anytime and lock in a time that fits your day. Transparent, up-front pricing helps Braintree and Greater Boston drivers plan with confidence.

• Includes OEM-spec oil and a Motorcraft oil filter
• Multi-point inspection and fluid top-offs included
• See current offers: service specials

A typical 2013 Ford Explorer oil change takes about 45–60 minutes at a dealership.

Plan for roughly an hour to allow for check-in, the oil and filter service, and a multi-point inspection. Booking ahead helps minimize wait time for Braintree, Quincy, and Weymouth drivers. Choose a time online and arrive a few minutes early for a smooth visit.

• Average bay time: 30–45 minutes, plus check-in/out
• Multi-point inspection performed during the visit
• Reserve your spot: schedule service

Change the 2013 Ford Explorer’s oil every 7,500 miles or 12 months under normal driving, or about every 5,000 miles in severe conditions.

Short trips in winter, stop-and-go Boston traffic, frequent idling, or towing qualify as severe duty and warrant shorter intervals. Many Explorers also use an oil-life monitor; always service when it alerts, even if you haven’t hit the time or mileage. Keep dated receipts to document maintenance.

• Normal: ~7,500 miles/12 months
• Severe: ~5,000 miles (cold starts, short trips, towing)
• Follow oil-life monitor alerts when they appear

The 2013 Ford Explorer 3.5L V6 specifies SAE 5W-20 oil meeting Ford WSS-M2C930-A (Motorcraft synthetic blend recommended).

Using the correct viscosity and Ford-approved oil helps cold-start protection and maintains proper timing and lubrication. The oil spec is printed on the oil cap and in the owner’s manual. We stock Motorcraft formulations that meet or exceed Ford’s requirements for Braintree-area driving.

• Viscosity: SAE 5W-20 (Ford-approved specification)
• Recommended: Motorcraft synthetic blend
• Confirm on oil cap/owner’s manual before servicing

The 2013 Ford Explorer 3.5L V6 takes 5.7 quarts of oil with a filter change.

This capacity supports proper oil pressure and cooling for the 3497 cc V6 (engine code 6VNAF3.5). Always replace the crush washer if applicable and verify the level after start-up. We measure twice and fill precisely to spec for reliable results.

• Engine: 3.5L V6 (non-turbo)
• Capacity: 5.7 quarts with filter
• Recheck dipstick after engine runs briefly

Yes if you want Ford-approved oil and a Motorcraft filter installed by factory-trained technicians with a multi-point inspection included.

Quick-lube shops can be cheaper for basic conventional oil, but your 2013 Ford Explorer benefits from OEM-spec parts and procedures that help preserve warranty eligibility. You’ll also receive documentation tied to your VIN, which simplifies future warranty claims.

• OEM-spec oil and Motorcraft filter used
• Inspection and fluid top-offs typically included
• Service history recorded to your vehicle

Missing or exceeding oil-change intervals can jeopardize warranty coverage if you cannot document maintenance per Ford’s schedule.

Keep dated receipts and mileage for each service and follow the owner’s manual or oil-life monitor. Warranty work generally requires a certified facility; adhering to OEM intervals protects you if an engine-related claim arises. We can help maintain accurate records for your 2013 Ford Explorer.

• Follow time/mileage or oil-life monitor alerts
• Retain receipts to prove compliance
• Certified service supports warranty claims

Conventional uses mineral oil, synthetic blend mixes mineral with synthetic, and full synthetic uses 100% synthetic base oil with superior stability.

Ford specifies a 5W-20 oil meeting its approval for the 2013 Ford Explorer; Motorcraft synthetic blend 5W-20 is commonly recommended. Full synthetic can offer better high-heat and cold-start protection, especially in varied New England driving. Always match the viscosity and spec on your oil cap/owner’s manual.

• Conventional: budget-friendly, shorter life
• Synthetic blend: OEM-recommended balance
• Full synthetic: best oxidation and cold-flow performance

Our 2013 Ford Explorer oil change follows Ford procedures with attention to detail. We confirm the correct viscosity and specification, then drain and properly capture used oil. A new Motorcraft oil filter is installed and the drain plug is torqued to spec. We refill to the precise capacity, start the engine, check for leaks, and verify the dipstick level. A multi-point inspection checks brakes, tires, fluids, belts, hoses, lights, and battery condition. Fluids are topped off and tire pressures set. You’ll leave with a dated, itemized service record for your maintenance file. Need a convenient time? Schedule service online or review service specials before you book.

The 2013 Ford Explorer 3.5L V6 uses SAE 5W-20 oil meeting Ford WSS-M2C930-A, with Motorcraft synthetic blend commonly recommended for balanced protection. Capacity is 5.7 quarts with a filter change. A Motorcraft FL-500S oil filter is a standard reference fitment for this engine. Under normal driving, change oil and filter every 7,500 miles or 12 months; in severe duty (frequent short trips, cold starts, towing, or heavy traffic), target about 5,000 miles. Always follow the oil-life monitor if equipped and confirm the spec on the oil cap or in the owner’s manual. Bring your 2013 Ford Explorer to Herb Chambers Ford of Braintree in Braintree for an OEM-spec oil change — schedule service.

We serve Braintree, Boston, Quincy, Weymouth, Dorchester, Medford, and nearby communities with efficient oil change appointments for the 2013 Ford Explorer. New England temperature swings and stop-and-go city traffic can stress oil—cold-start pumpability and heat stability matter. Our team uses Ford-approved oil and a Motorcraft filter, resets the oil-life monitor if applicable, and provides a clear inspection report you can trust. Book a time that fits your day with our online scheduler and check current coupons beforehand. For directions, hours, or to reserve a bay now, visit our website or schedule an appointment in just a few clicks.